Interzinc B. Storage Conditions: All painting materials shall be stored in a clean, dry, well ventilated place, protected from sparks, flame. A three component, metallic, zinc rich epoxy primer which passes Slip B coefficient. Interzinc B complies with SSPC Paint 20 and contains minimum 80%. Interzinc Call for Price. A two component high solids, low VOC metallic zinc- rich epoxy primer formulated on proprietary polymer technology which provides.
|Published (Last):||14 March 2005|
|PDF File Size:||10.86 Mb|
|ePub File Size:||17.50 Mb|
|Price:||Free* [*Free Regsitration Required]|
Interzinc | Litnobiles
Low Atmosphere or Interior Applications – Rural area, low pollution, dry environments. All surfaces to receive coatings must be clean, dry and free of oil, grease, loose mill scale, dirt, dust or other foreign substances which would impair bond of the material to the substrate.
Coating will be a complete system from a single source consisting of primer and topcoat. Retain only coating systems specified and delete all others. Mild Atmosphere Applications- Urban and industrial atmospheres.
Provide a mock-up for evaluation of surface preparation techniques and application workmanship. Regional Materials- 20 percent extracted, processed and manufactured regionally: The application must be witnessed by the Architect’s or Owner’s representative and is subject to their approval.
The relative humidity of the application area shall not exceed intrezinc maximum of 85 percent for 24 hours prior, during and 24 hours after the application of the material.
Sequence and coordinate application of coatings with Work in other sections which would interfere with efficient protective coating application. When deciding on the extent of the mock-up, consider all the major different types of work on the project. Upon completion of installation, all excess interzic, overspray and debris must be cleared and removed from the job site. For each finish product specified, two samples representing actual product, color, and finish.
The Manufacturer’s quality management system must be assessed and interziinc by an independent registrar as conforming to the requirements of ISO Protect work area from windblown dust and rain. Areas will be designated by the Architect. Coordinate with Section and Contract Drawings for all Moderate Atmosphere areas of the project.
Delete the next paragraph if not applicable. Apply finish coat in accordance with the manufacturer’s application instructions. Commencement of application is acceptance of substrate. Store materials in strict accordance with manufacturers documented instructions. Do not apply coatings under environmental conditions outside manufacturer’s absolute limits.
Interior chemical processing areas and swimming pools. All products listed in this section must be manufactured under the appropriate follow-up service with each container bearing the certified label mark. International Paint, LLC, which is located at: Structural steel and framing with reference to primer receiving fire protection materials.
Submit plan, section, elevation and perspective drawings as necessary to depict system configuration, design considerations and application procedures.
At project closeout, provide to Owner or Owners Representative an executed copy of the manufacturer’s standard limited warranty against manufacturing defect, outlining its terms, conditions, and exclusions from coverage.
Pipes, ducts, conduits, hangers and supports, equipment, and equipment enclosures exposed to view in all rooms and spaces. Information must demonstrate equivalence of product and performance to the specified material and complete systems.
Items specified or provided with factory finish; 351 and products having factory-applied primer are not considered factory finished. Marine, offshore and coastal areas with high salinity.
Requests for substitutions must be made 30 days prior to submittal and contain the full name of each product, descriptive literature, testing data collected from industry consensus standard testing, data on past performance, manufacturer’s instruction for use and generic type.
Company specializing in applying the work of this section with a minimum of three 3 years documented experience and certified by the manufacturer. Surfaces Not to be Painted: Before proceeding with the work, the interzinx will apply the primer and finish coat to a representative substrate section of square feet in size. Submit manufacturer’s written installation instructions.
Interzinc B – A k i r a
High Performance coatings applied in inyerzinc field with Company specializing in manufacturing products listed in this section with a minimum of ten 10 years documented experience. Moderate Atmosphere Applications – Industrial and coastal areas.
Interzinnc Paint has operations in 54 countries worldwide and over 3, employees. Maintain environmental conditions temperature, humidity, and ventilation within limits recommended by manufacturer for optimum results. Pipes, ducts, conduits, hangers and supports, equipment, and equipment enclosures exposed to weather or view – corrosion-resistant finish.
Do not commence application of coatings until the contractor, applicator and inspector have examined the surfaces to receive Work in this section, and determined that the surfaces are acceptable to receive the specified materials. Do not commence adjacent or adjoining Work until the application of the coatings is complete in that area.
Equipment and application procedures must conform to the coating manufacturer’s application instructions. Deliver materials in manufacturer’s original, sealed, undamaged container with identification label intact.
Apply material at the required dry film thickness. Steel substrate temperature shall be a minimum of 5 deg F 3 deg C above the dew point of the surrounding air for a period of 24 hours prior and during the application of the material.
Once agreed upon in writing it serves as a guide for the finished work. Pipes, ducts, conduits, hangers and supports, equipment, and equipment enclosures exposed to view in all rooms and spaces except niterzinc rooms, electrical rooms, and utility rooms.
Grind smooth all weld spatter and defects prior to interrzinc of coating application. Interzonc necessary, cleaning or other corrections of the surfaces to receive coatings are the responsibility of the interzin of the incompatible substrate.
Temporary protection and heat shall be maintained at this minimum temperature for 24 hours interzjnc, during and 24 hours after material application. Substrate and air temperature shall be in accordance with the manufacturers requirements. Submit applicators current certification as a manufacturer trained and approved applicator. The following is one example of how a mock-up on a large project might be specified. Provide masking, drop cloths or other suitable coverings iinterzinc prevent overspray onto surfaces not intended to be affected by Work in this section.